Quick response, English and Thai speaking. Always on time. 100% Guarantee.
Fantastic job
- Andrew White
You just spent weeks or months on a renovation. The temptation to save money by cleaning up yourself is understandable. Here is why that almost never works out the way you expect.
Construction dust is not like household dust. It contains particles of concrete,ite, silica, and whatever materials were cut, drilled, or sanded during your project. These particles are extremely fine, measuring 2.5 to 10 microns. A regular household vacuum does not filter particles this small. It picks them up from the floor and blows them back into the air through its exhaust. You vacuum a room, and within an hour, a new layer of dust has settled on every surface. A HEPA-filtered vacuum captures particles down to 0.3 microns, which is why professional post-construction cleaning uses HEPA equipment exclusively.
Most people underestimate the time required by a factor of three to five. A two-bedroom condo after a kitchen renovation typically takes a professional team 6 to 8 hours. Doing it yourself, without commercial equipment, takes two to three full days of effort. Every cabinet must be opened, wiped inside, and closed. Every window track must be brushed out. Every surface must be wiped, often multiple times, because the fine dust keeps resettling.
Construction dust travels through air currents to rooms that were not part of the renovation. It enters AC ducts and sits on evaporator coils. It settles inside closed cabinets and drawers. It coats the inside of light fixtures. A surface wipe of visible areas misses these hidden deposits, which continue releasing particles into your air for weeks.
The scope goes far beyond what a person with a mop and bucket can accomplish:
Every surface in every room is cleaned, starting from the ceiling and working down. This includes the insides of all cabinets, closets, and drawers. Light fixtures are opened, cleaned, and closed. Switch plates are removed, the wall behind them is wiped, and they are replaced. This level of detail eliminates the hidden dust deposits that casual cleaning misses.
Contractors leave behind tape residue, dried paint drops, grout haze on new tiles, silicone smears around fixtures, and label adhesive on new appliances. Each type of residue requires a specific removal technique to avoid damaging the underlying surface. Scraping dried paint off a new floor with the wrong tool creates scratches that are permanent.
Windows are usually the dirtiest item after construction. Cement splatter, paint spots, tape adhesive, and a heavy dust film must all be removed without scratching the glass. Interior and exterior surfaces are cleaned, along with tracks and frames that are typically packed with construction debris.
AC vent covers are removed and cleaned. Accessible filters are vacuumed or replaced. This step is critical because running your AC without cleaning the system first circulates construction dust through every room every time the unit turns on.
Wait until all construction, painting, tiling, and finishing work is 100% complete. Every additional day of work after a clean means another layer of dust. The clean should be the final step before furniture delivery and move-in. If the renovation was extensive (structural changes, full floor replacement, extensive sanding), consider a second light clean 48 hours after the first to catch resettled particles.
